Assessing the influence of parameters on tissue welding in small bowel end-to-end anastomosis in vitro and in vivo.

BACKGROUND: The use of high-frequency electric welding technology for intestinal end-to-end anastomosis holds significant promise. Past studies have focused on in vitro, and the safety and efficacy of this technology is uncertain, severely limiting the clinical application of this technology. This study investigates the impact of compression pressure, energy dosage, and duration on anastomotic quality using a homemade anastomosis device in both in vitro and in vivo settings. METHODS: Two hundred eighty intestines and 5 experimental pigs were used for in vitro and in vivo experiments, respectively. The in vitro experiments were conducted to study the effects of initial pressure (50-400 kpa), voltage (40-60 V), and time (10-20 s) on burst pressure, breaking strength, thermal damage, and histopathological microstructure of the anastomosis. Optimal parameters were then inlaid into a homemade anastomosis and used for in vivo experiments to study the postoperative porcine survival rate and the pathological structure of the tissues at the anastomosis and the characteristics of the collagen fibers. RESULTS: The anastomotic strength was highest when the compression pressure was 250 kPa, the voltage was 60 V, and the time was 15 s. The degree of thermal damage to the surrounding tissues was the lowest. The experimental pigs had no adverse reactions after the operation, and the survival rate was 100%. 30 days after the operation, the surgical site healed well, and the tissues at the anastomosis changed from immediate adhesions to permanent connections. CONCLUSION: High-frequency electric welding technology has a certain degree of safety and effectiveness. It has the potential to replace the stapler anastomosis in future and become the next generation of new anastomosis device.

Protein Tyrosine Amination: Detection, Imaging, and Chemoproteomic Profiling with Synthetic Probes.

Protein tyrosine nitration (PTN) by oxidative and nitrative stress is a well-known post-translational modification that plays a role in the initiation and progression of various diseases. Despite being recognized as a stable modification for decades, recent studies have suggested the existence of a reduction in PTN, leading to the formation of 3-aminotyrosine (3AT) and potential denitration processes. However, the vital functions of 3AT-containing proteins are still unclear due to the lack of selective probes that directly target the protein tyrosine amination. Here, we report a novel approach to label and enrich 3AT-containing proteins with synthetic salicylaldehyde (SAL)-based probes: SALc-FL with a fluorophore and SALc-Yn with an alkyne tag. These probes exhibit high selectivity and efficiency in labeling and can be used in cell lysates and live cells. More importantly, SALc-Yn offers versatility when integrated into multiple platforms by enabling proteome-wide quantitative profiling of cell nitration dynamics. Using SALc-Yn, 355 proteins were labeled, enriched, and identified to carry the 3AT modification in oxidatively stressed RAW264.7 cells. These findings provide compelling evidence supporting the involvement of 3AT as a critical intermediate in nitrated protein turnover. Moreover, our probes serve as powerful tools to investigate protein nitration and denitration processes, and the identification of 3AT-containing proteins contributes to our understanding of PTN dynamics and its implications in cellular redox biology.

Recent Advancement on Quantum Dot-coupled Heterojunction Structures in Catalysis：A Review.

Photoelectrocatalysis stands as an exceptionally efficient and sustainable method, significantly addressing both energy scarcity and environmental pollution challenges. Within this realm, quantum dots (QDs) have garnered immense attention for their outstanding catalytic properties. Their unique features-cost-effectiveness, high efficiency, remarkable stability, and exceptional photovoltaic characteristics-set them apart from other tunable semiconductor materials. Heterojunction structures based on quantum dots remarkably boost solar energy conversion efficiency. This review aims to provide a comprehensive overview of the impacts generated by heterojunctions formed using diverse quantum dots and delve into their catalytic applications. Moreover, it sheds light on recent advancements utilizing quantum dots in modifying optoelectronic semiconductor materials for diverse purposes, ranging from hydrogen (H2) generation to carbon and nitrogen reduction, as well as pollutant degradation. Additionally, the paper offers valuable insights into challenges faced by quantum dot applications and outlines promising future prospects.

Factors influencing periprosthetic bone mineral density in total knee arthroplasty: a systematic review.

INTRODUCTION: Following total knee arthroplasty (TKA), there is a significant decline in periprosthetic bone mineral density (BMD), potentially resulting in complications such as prosthetic loosening, periprosthetic fracture, and influencing the postoperative recovery. The objective of this study was to summarize the factors influencing periprosthetic BMD in TKA from existing studies. METHODS: A comprehensive systematic search was performed in 4 databases: Pubmed, Embase, Web of Science, and Cochrane Library. The last search was carried out on October 12, 2023. We used the keywords ''total knee arthroplasty'', ''bone mineral density'' and each of them combined with ''tibia'' and ''femur'' to identify all relevant articles reporting about potential impact factors influencing the periprosthetic BMD in patients after TKA. RESULTS: Out of 1391 articles, 22 published from 2001 to 2023 were included in this systematic review. Following eligibility screening, six significant categories affecting periprosthetic BMD were recognized: prosthesis type, design of stem, coating, body weight, cement, and peg distance. CONCLUSION: Mobile-bearing prostheses, modular polyethylene design, short stems, cruciform stems, avoidance of bone cement, higher body mass index, titanium nitride coating, and a smaller medial peg distance could potentially benefit periprosthetic BMD. Comprehensive consideration of diverse factors influencing periprosthetic BMD before surgery and collaboration with post-operative drug therapy are essential. TRIAL REGISTRY: The PROSPERO registration number is CRD42023472030.

Human-multimodal deep learning collaboration in 'precise' diagnosis of lupus erythematosus subtypes and similar skin diseases.

BACKGROUND: Lupus erythematosus (LE) is a spectrum of autoimmune diseases. Due to the complexity of cutaneous LE (CLE), clinical skin image-based artificial intelligence is still experiencing difficulties in distinguishing subtypes of LE. OBJECTIVES: We aim to develop a multimodal deep learning system (MMDLS) for human-AI collaboration in diagnosis of LE subtypes. METHODS: This is a multi-centre study based on 25 institutions across China to assist in diagnosis of LE subtypes, other eight similar skin diseases and healthy subjects. In total, 446 cases with 800 clinical skin images, 3786 multicolor-immunohistochemistry (multi-IHC) images and clinical data were collected, and EfficientNet-B3 and ResNet-18 were utilized in this study. RESULTS: In the multi-classification task, the overall performance of MMDLS on 13 skin conditions is much higher than single or dual modals (Sen = 0.8288, Spe = 0.9852, Pre = 0.8518, AUC = 0.9844). Further, the MMDLS-based diagnostic-support help improves the accuracy of dermatologists from 66.88% ± 6.94% to 81.25% ± 4.23% (p = 0.0004). CONCLUSIONS: These results highlight the benefit of human-MMDLS collaborated framework in telemedicine by assisting dermatologists and rheumatologists in the differential diagnosis of LE subtypes and similar skin diseases.

Novel Cervical Endoscopic Unilateral Laminoforaminotomy for Bilateral Decompression in Cervical Spondylosis Myeloradiculopathy: A Technical Note and Clinical Results.

Background: This study investigates the efficacy of the Cervical Endoscopic Unilateral Laminoforaminotomy for Bilateral Decompression (CE-ULFBD) technique in treating cervical myeloradiculopathy, primarily caused by degenerative spondylosis. Traditionally managed through multisegmental anterior cervical discectomy and fusion (ACDF) or laminoplasty combined with foraminotomy, this condition has recently experienced a promising shift towards minimally invasive approaches, particularly endoscopic spinal decompression. While empirical evidence is still emerging, these techniques show potential for effective treatment. Method: The objective was to evaluate the outcomes of CE-ULFBD in achieving single or multilevel bilateral foraminal and central decompression, emphasizing the reduction of injury to posterior cervical muscles and the associated postoperative neck soreness common in conventional procedures. This paper delineates the surgical procedures involved in CE-ULFBD and presents the clinical outcomes of nine patients diagnosed with myeloradiculopathy due to severe cervical stenosis. Result: Assessments were conducted using the Visual Analogue Scale (VAS) for neck and arm pain and the Modified Japanese Orthopaedic Association scale (mJOA) for the activity measurement of daily living. Results indicated a considerable decrease in pain levels according to the VAS, coupled with significant improvements in functional capacities as measured by the mJOA scale. Additionally, no major postoperative complications were noted during the follow-up period. Conclusion: The study concludes that CE-ULFBD is a safe and effective approach for the treatment of cervical myeloradiculopathy resulting from severe cervical stenosis, offering a viable and less invasive alternative to traditional decompressive surgeries.

AtPIP1;4 and AtPIP2;4 Cooperatively Mediate H2O2 Transport to Regulate Plant Growth and Disease Resistance.

The rapid production of hydrogen peroxide (H2O2) is a hallmark of plants' successful recognition of pathogen infection and plays a crucial role in innate immune signaling. Aquaporins (AQPs) are membrane channels that facilitate the transport of small molecular compounds across cell membranes. In plants, AQPs from the plasma membrane intrinsic protein (PIP) family are utilized for the transport of H2O2, thereby regulating various biological processes. Plants contain two PIP families, PIP1s and PIP2s. However, the specific functions and relationships between these subfamilies in plant growth and immunity remain largely unknown. In this study, we explore the synergistic role of AtPIP1;4 and AtPIP2;4 in regulating plant growth and disease resistance in Arabidopsis. We found that in plant cells treated with H2O2, AtPIP1;4 and AtPIP2;4 act as facilitators of H2O2 across membranes and the translocation of externally applied H2O2 from the apoplast to the cytoplasm. Moreover, AtPIP1;4 and AtPIP2;4 collaborate to transport bacterial pathogens and flg22-induced apoplastic H2O2 into the cytoplasm, leading to increased callose deposition and enhanced defense gene expression to strengthen immunity. These findings suggest that AtPIP1;4 and AtPIP2;4 cooperatively mediate H2O2 transport to regulate plant growth and immunity.

A new equation for estimating low-density lipoprotein cholesterol concentration based on machine learning.

Low-density lipoprotein cholesterol (LDL-C) is a crucial marker of cardiovascular system damage. In the Chinese population, the estimation of LDL-C concentration by Friedewald, Martin-Hopkins or Sampson equations is not accurate. The aim of this study was to develop a group of new equations for calculating LDL-C concentration using machine learning techniques and to evaluate their efficacy. A total of 182,901 patient samples were collected with standard lipid panel measurements. These samples were collated and randomly divided into a training set and a test set. In the training set, a new equation was constructed using polynomial ridge-regression and compared to the Friedewald, Martin/Hopkins and extended Martin/Hopkins, or Sampson equations in the test set. Subsequently, an additional set of 17,285 patient samples were collected to evaluate the performance of the new equation in clinical practice. The new equation, a ternary cubic equation, was accurate and easy to use, with a goodness-of-fit R2 of 0.9815 and an uncertainty MSE of 37.4250 on the testing set. The difference between the calculated value by the new equation and the measured value of LDL-C was small (0.0424 ±â€…5.1161 vs Friedewald equation: -13.3647 ±â€…17.9198, vs Martin/Hopkins and extended Martin/Hopkins equation: -6.4737 ±â€…8.1036, vs Sampson equation: -8.9252 ±â€…12.6522, P < .001). It could accurately calculate LDL-C concentration even at high triglyceride and low LDL-C. Furthermore, the new equation could also precisely calculate LDL-C concentration in actual clinical use (R2 = 0.9780, MSE = 24.8482). The new equation developed in this study can accurately calculate LDL-C concentration within the full concentration range of triglyceride and LDL-C, and can serve as a supplement to the direct determination of LDL-C concentration for the prevention, treatment, evaluation, and monitoring of atherosclerotic diseases, compared to the Friedewald, Martin/Hopkins and extended Martin/Hopkins, or Sampson equations.

Trends and risk factors for drug-resistant tuberculosis among children in Sichuan, China: A 10-year retrospective analysis, 2013-2022.

To investigate the status of the drug-resistant tuberculosis (DR-TB) among children in Sichuan, and to find out the risk factors and high-risk population related to drug resistance among children. The clinical data of tuberculosis patients ≤14 years old with culture-confirmed tuberculosis hospitalized in Chengdu Public Health Clinical Center from January 2013 through December 2022 were collected. Clinical data such as gender, age, ethnicity, history of anti-TB treatment, history of exposure to tuberculosis, nutritional status, and specific drug resistance of the children were collected and recorded. The drug resistance of children in different age groups (0-4 years old, 5-9 years old, 10-14 years old) and different periods (2013-2017 and 2018-2022) were grouped and compared. Logistic regression analysis was to analyze analysis of risk factors of drug resistance in children. A total of 438 children with culture-confirmed tuberculosis were screened. Among them, 26.19% (11/42) were 0 to 4 years old, 33.33% (22/66) were 5 to 9 years old, and 36.67% (121/330) were 10 to 14 years old among the resistant children. There was no statistically significant difference in the resistance rate among the 3 groups (P = .385). The proportions of DR-TB, monoresistant tuberculosis, polydrug-resistant tuberculosis were decreased during 2019 to 2022 compared with 2013 to 2017 (P < .0001). The resistance rates of drug resistant, monoresistant, polydrug-resistant, isoniazid-resistant, and rifampicin resistant during 2018 to 2022 were decreased compared with those from 2013 to 2017 (P < .05), but the multi-drug resistance rate was not decreased (P = .131, without statistical difference). The results of logistic regression analysis showed that male gender OR = 1.566 (95% CI 1.035-2.369), a history of antituberculosis therapy OR = 4.049 (95% CI 1.442-11.367), and pulmonary and extrapulmonary tuberculosis OR = 7.335 (95% CI 1.401-38.392) were risk factors for the development of drug resistance; but fever OR = 0.581 (95% CI 0.355-0.950) was Protective factor. The total drug resistance rate of children in Sichuan showed a downward trend, but the rate of multi-drug-resistant tuberculosis was still at a high level, and the form of drug resistance was still severe. Absence of fever, male, retreatment, and pulmonary concurrent with extrapulmonary tuberculosis are risk factors for DR-TB in children.

Flexible Piezoresistive Sensors Based on PPy Granule-Anchored Multilayer Fibrous Membranes with a Wide Operating Range and High Sensitivity.

The employment of flexible piezoresistive sensors has sparked growing interest within the realm of wearable electronic devices, specifically in the fields of health detection and e-skin. Nevertheless, the advancement of piezoresistive sensors has been impeded by their limited sensitivity and restricted operating ranges. Consequently, it is imperative to fabricate sensors with heightened sensitivity and expanded operating ranges through the utilization of the appropriate methodologies. In this paper, piezoresistive sensors were fabricated utilizing electrospun polyvinylidene fluoride/polyacrylonitrile/polyethylene-polypropylene glycol multilayer fibrous membranes anchored with polypyrrole granules as the sensing layer, while electrospun thermoplastic polyurethane (TPU) fibers were employed as the flexible substrate. The sensitivity of the sensor is investigated by varying the fiber diameter of the sensing layer. The experimental findings reveal that a concentration of 14 wt % in the spinning solution exhibits high sensitivity (996.7 kPa-1) within a wide working range (0-10 kPa). This is attributed to the favorable diameter of the fibers prepared at this concentration, which facilitates the uniform in situ growth of pyrrole. The highly deformable TPU flexible fibers and multilayer sensing layer structure enable different linear responses across a broad pressure range (0-1 MPa). Furthermore, the sensor demonstrates good cyclic stability and can detect human movements under different pressures. These results suggest that the piezoresistive sensor with a wide operating range and high sensitivity has significant potential for future health monitoring and artificial intelligence applications.

Stability and 3D-printing performance of high-internal-phase emulsions based on ultrafine soybean meal particles.

There are numerous studies on the application of soybean whey protein in three-dimensional (3D) printing. In this study, the effects of soybean meal particles (5%, 6%, 7%, 8%, 9%, and 10%) and oil-phase concentrations (70%, 72%, 74%, 76%, and 78%) on the stability and 3D-printing performance of a soybean-meal-based high-internal-phase emulsion were investigated. The results showed that the particle size of the emulsion decreased with increasing soybean meal particle concentration, and that increasing the concentration of the oil phase improved the viscoelasticity of the emulsion. Rheological tests further showed that the higher storage modulus of the emulsion indicated better support and stability. The emulsion with 8% soybean meal-particles and 76% oil-phase concentration exhibited the best printing effect. This study provides an effective solution for the preparation of stabilized high-internal-phase emulsions of soybean meal particles suitable for 3D printing.

Artificial Heterointerfaces with Regulated Charge Distribution of Ni Active Sites for Urea Oxidation Reaction.

In contrast to the thermodynamically unfavorable anodic oxygen evolution reaction, the electrocatalytic urea oxidation reaction (UOR) presents a more favorable thermodynamic potential. However, the practical application of UOR has been hindered by sluggish kinetics. In this study, hierarchical porous nanosheet arrays featuring abundant Ni-WO3 heterointerfaces on nickel foam (Ni-WO3/NF) is introduced as a monolith electrode, demonstrating exceptional activity and stability toward UOR. The Ni-WO3/NF catalyst exhibits unprecedentedly rapid UOR kinetics (200 mA cm-2 at 1.384 V vs. RHE) and a high turnover frequency (0.456 s-1), surpassing most previously reported Ni-based catalysts, with negligible activity decay observed during a durability test lasting 150 h. Ex situ X-ray photoelectron spectroscopy and density functional theory calculations elucidate that the WO3 interface significantly modulates the local charge distribution of Ni species, facilitating the generation of Ni3+ with optimal affinity for interacting with urea molecules and CO2 intermediates at heterointerfaces during UOR. This mechanism accelerates the interfacial electrocatalytic kinetics. Additionally, in situ Fourier transform infrared spectroscopy provides deep insights into the substantial contribution of interfacial Ni-WO3 sites to UOR electrocatalysis, unraveling the underlying molecular-level mechanisms. Finally, the study explores the application of a direct urea fuel cell to inspire future practical implementations.

Light-driven phase transition of diffractive optical elements based on liquid crystal elastomers.

Diffractive optical element is advantageous for miniaturization, arraying and integration of optical systems. They have been widely used in beam shaping, diffractive imaging, generating beam arrays, spectral optimization and other aspects. Currently, the vast majority of diffractive optics are not tunable. This limits the applicability and functionality of these devices. Here we report a tunable diffractive optical element controlled by light in the visible band. The diffractive optical element consists of a square gold microarray deposited on a deformable substrate. The substrate is made of a liquid crystal elastomer. When pumped by a 532 nm laser, the substrate is deformed to change the crystal lattice. This changes the far-field diffraction pattern of the device. The proposed concept establishes a light-controlled soft platform with great potential for tunable/reconfigurable photonic devices, such as filters, couplers, holograms and structural color displays.

Identification of KRAS mutation-associated gut microbiota in colorectal cancer and construction of predictive machine learning model.

Gut microbiota has demonstrated an increasingly important role in the onset and development of colorectal cancer (CRC). Nonetheless, the association between gut microbiota and KRAS mutation in CRC remains enigmatic. We conducted 16S rRNA sequencing on stool samples from 94 CRC patients and employed the linear discriminant analysis effect size algorithm to identify distinct gut microbiota between KRAS mutant and KRAS wild-type CRC patients. Transcriptome sequencing data from nine CRC patients were transformed into a matrix of immune infiltrating cells, which was then utilized to explore KRAS mutation-associated biological functions, including Gene Ontology items and Kyoto Encyclopedia of Genes and Genomes pathways. Subsequently, we analyzed the correlations among these KRAS mutation-associated gut microbiota, host immunity, and KRAS mutation-associated biological functions. At last, we developed a predictive random forest (RF) machine learning model to predict the KRAS mutation status in CRC patients, based on the gut microbiota associated with KRAS mutation. We identified a total of 26 differential gut microbiota between both groups. Intriguingly, a significant positive correlation was observed between Bifidobacterium spp. and mast cells, as well as between Bifidobacterium longum and chemokine receptor CX3CR1. Additionally, we also observed a notable negative correlation between Bifidobacterium and GOMF:proteasome binding. The RF model constructed using the KRAS mutation-associated gut microbiota demonstrated qualified efficacy in predicting the KRAS phenotype in CRC. Our study ascertained the presence of 26 KRAS mutation-associated gut microbiota in CRC and speculated that Bifidobacterium may exert an essential role in preventing CRC progression, which appeared to correlate with the upregulation of mast cells and CX3CR1 expression, as well as the downregulation of GOMF:proteasome binding. Furthermore, the RF model constructed on the basis of KRAS mutation-associated gut microbiota exhibited substantial potential in predicting KRAS mutation status in CRC patients.IMPORTANCEGut microbiota has emerged as an essential player in the onset and development of colorectal cancer (CRC). However, the relationship between gut microbiota and KRAS mutation in CRC remains elusive. Our study not only identified a total of 26 gut microbiota associated with KRAS mutation in CRC but also unveiled their significant correlations with tumor-infiltrating immune cells, immune-related genes, and biological pathways (Gene Ontology items and Kyoto Encyclopedia of Genes and Genomes pathways). We speculated that Bifidobacterium may play a crucial role in impeding CRC progression, potentially linked to the upregulation of mast cells and CX3CR1 expression, as well as the downregulation of GOMF:Proteasome binding. Furthermore, based on the KRAS mutation-associated gut microbiota, the RF model exhibited promising potential in the prediction of KRAS mutation status for CRC patients. Overall, the findings of our study offered fresh insights into microbiological research and clinical prediction of KRAS mutation status for CRC patients.

Adoption of Rehabilitation Climbing Wall Combined with Brain-computer Fusion Interface in Adolescent Idiopathic Scoliosis.

Background: As the adoption of brain-computer interface (BCI) technology in rehabilitation training is gradually maturing, the rehabilitation climbing walls combined with BCI technology are applied in adolescent idiopathic scoliosis (AIS) adoption research. Methods: From January 2022 to January 2023, a total of 100 AIS patients were assigned into a control group (group C, rehabilitation climbing wall training) and an observation group (group B, rehabilitation climbing wall training based on BCI technology) equally and randomly. The therapeutic effects of the patients were analyzed, including the Cobb angle, waist range of motion, and quality of life. Results: The Cobb angles of all patients after three months of treatment were obviously smaller than those preoperatively, and the Cobb angle of patients in group B was smaller than that of group C. The improvement rate of the Cobb angle of patients in group B was substantially superior to that in group C (95%CI 17.8-42.6, P = .034). Moreover, patients in groups C and B had more extensive waist flexion, tension, and left ranges. Suitable lateral regions after three months of treatment than before and lower lumbar dysfunction scores, and group B was significantly better than group C (95%CI 20.3-35.4, P = .042). After three months of treatment, all patients' general condition, physical pain, physiological function, and mental health scores were higher than those preoperatively, and the scores in group B were substantially superior to those in group C (95%CI 51.3-84.2, P = .022). Furthermore, the total effective rate of patients in group B after three months was markedly superior to that in group C (96% vs. 82%) (95%CI 79.3-97.2, P = .014). Conclusion: The results of the study suggest that the rehabilitation climbing wall training method combined with brain-computer interface (BCI) technology has significant therapeutic effects on adolescent idiopathic scoliosis (AIS) patients. The intervention was found to effectively reduce the Cobb angle, increase the lumbar range of motion, improve lumbar function, and enhance the quality of life of the patients. These findings indicate that the adoption of rehabilitation climbing walls combined with BCI technology can be clinically valuable in the treatment of AIS. This approach holds promise in improving the rehabilitation outcomes for AIS patients, providing a non-invasive alternative to surgical interventions.

GLP-1 modulated the firing activity of nigral dopaminergic neurons in both normal and parkinsonian mice.

The spontaneous firing activity of nigral dopaminergic neurons is associated with some important roles including modulation of dopamine release, expression of tyrosine hydroxylase (TH), as well as neuronal survival. The decreased neuroactivity of nigral dopaminergic neurons has been revealed in Parkinson's disease. Central glucagon-like peptide-1 (GLP-1) functions as a neurotransmitter or neuromodulator to exert multiple brain functions. Although morphological studies revealed the expression of GLP-1 receptors (GLP-1Rs) in the substantia nigra pars compacta, the possible modulation of GLP-1 on spontaneous firing activity of nigral dopaminergic neurons is unknown. The present extracellular in vivo single unit recordings revealed that GLP-1R agonist exendin-4 significantly increased the spontaneous firing rate and decreased the firing regularity of partial nigral dopaminergic neurons of adult male C57BL/6 mice. Blockade of GLP-1Rs by exendin (9-39) decreased the firing rate of nigral dopaminergic neurons suggesting the involvement of endogenous GLP-1 in the modulation of firing activity. Furthermore, the PKA and the transient receptor potential canonical (TRPC) 4/5 channels are involved in activation of GLP-1Rs-induced excitatory effects of nigral dopaminergic neurons. Under parkinsonian state, both the exogenous and endogenous GLP-1 could still induce excitatory effects on the surviving nigral dopaminergic neurons. As the mild excitatory stimuli exert neuroprotective effects on nigral dopaminergic neurons, the present GLP-1-induced excitatory effects may partially contribute to its antiparkinsonian effects.

Targeting SMAD3 Improves Response to Oxaliplatin in Esophageal Adenocarcinoma Models by Impeding DNA Repair.

PURPOSE: TGFß signaling is implicated in the progression of most cancers, including esophageal adenocarcinoma (EAC). Emerging evidence indicates that TGFß signaling is a key factor in the development of resistance toward cancer therapy. EXPERIMENTAL DESIGN: In this study, we developed patient-derived organoids and patient-derived xenograft models of EAC and performed bioinformatics analysis combined with functional genetics to investigate the role of SMAD family member 3 (SMAD3) in EAC resistance to oxaliplatin. RESULTS: Chemotherapy nonresponding patients showed enrichment of SMAD3 gene expression when compared with responders. In a randomized patient-derived xenograft experiment, SMAD3 inhibition in combination with oxaliplatin effectively diminished tumor burden by impeding DNA repair. SMAD3 interacted directly with protein phosphatase 2A (PP2A), a key regulator of the DNA damage repair protein ataxia telangiectasia mutated (ATM). SMAD3 inhibition diminished ATM phosphorylation by enhancing the binding of PP2A to ATM, causing excessive levels of DNA damage. CONCLUSIONS: Our results identify SMAD3 as a promising therapeutic target for future combination strategies for the treatment of patients with EAC.

Hollow Metal-Organic Framework/MXene/Nanocellulose Composite Films for Giga/Terahertz Electromagnetic Shielding and Photothermal Conversion.

With the continuous advancement of communication technology, the escalating demand for electromagnetic shielding interference (EMI) materials with multifunctional and wideband EMI performance has become urgent. Controlling the electrical and magnetic components and designing the EMI material structure have attracted extensive interest, but remain a huge challenge. Herein, we reported the alternating electromagnetic structure composite films composed of hollow metal-organic frameworks/layered MXene/nanocellulose (HMN) by alternating vacuum-assisted filtration process. The HMN composite films exhibit excellent EMI shielding effectiveness performance in the GHz frequency (66.8 dB at Ka-band) and THz frequency (114.6 dB at 0.1-4.0 THz). Besides, the HMN composite films also exhibit a high reflection loss of 39.7 dB at 0.7 THz with an effective absorption bandwidth up to 2.1 THz. Moreover, HMN composite films show remarkable photothermal conversion performance, which can reach 104.6 °C under 2.0 Sun and 235.4 °C under 0.8 W cm-2, respectively. The unique micro- and macro-structural design structures will absorb more incident electromagnetic waves via interfacial polarization/multiple scattering and produce more heat energy via the local surface plasmon resonance effect. These features make the HMN composite film a promising candidate for advanced EMI devices for future 6G communication and the protection of electronic equipment in cold environments.

ADCY4 promotes brain metastasis in small cell lung cancer and is associated with energy metabolism.

Brain metastasis (BMs) in small cell lung cancer (SCLC) has a very poor prognosis. This study combined WGCNA with the mfuzz algorithm to identify potential biomarkers in the peripheral blood of patients with BMs. By comparing the significantly differentially expressed genes present in BMs samples, we identified ADCY4 as a target for further study. Expression of ADCY4 was used to cluster mfuzz expression pattern, and 28 hub genes for functional enrichment. PPI network analysis were obtained by comparing with differentially expressed genes in BMs. GABRE, NFE4 and LMOD2 are highly expressed in patients with BMs and have a good diagnostic effect. Immunoinfiltration analysis showed that SCLC patients with BMs may be associated with memory B cells, Tregs, NK cell activation, macrophage M0 and dendritic cell activation. prophytic was used to investigate the ADCY4-mediated anti-tumor drug response. In conclusion, ADCY4 can be used as a promising candidate biomarker for predicting BMs, molecular and immune features in SCLC. PCR showed that ADCY4 expression was increased in NCI-H209 and NCI-H526 SCLC cell lines. In vitro experiments confirmed that the expression of ADCY4 was significantly decreased after anti-PD1 antibody treatment, while the expression of energy metabolism factors were significantly different. This study reveals a potential mechanism by which ADCY4 mediates poor prognosis through energy metabolism -related pathways in SCLC.

Self-assembly of differentiated dental pulp stem cells facilitates spheroid human dental organoid formation and prevascularization.

BACKGROUND: The self-assembly of solid organs from stem cells has the potential to greatly expand the applicability of regenerative medicine. Stem cells can self-organise into microsized organ units, partially modelling tissue function and regeneration. Dental pulp organoids have been used to recapitulate the processes of tooth development and related diseases. However, the lack of vasculature limits the utility of dental pulp organoids. AIM: To improve survival and aid in recovery after stem cell transplantation, we demonstrated the three-dimensional (3D) self-assembly of adult stem cell-human dental pulp stem cells (hDPSCs) and endothelial cells (ECs) into a novel type of spheroid-shaped dental pulp organoid in vitro under hypoxia and conditioned medium (CM). METHODS: During culture, primary hDPSCs were induced to differentiate into ECs by exposing them to a hypoxic environment and CM. The hypoxic pretreated hDPSCs were then mixed with ECs at specific ratios and conditioned in a 3D environment to produce prevascularized dental pulp organoids. The biological characteristics of the organoids were analysed, and the regulatory pathways associated with angiogenesis were studied. RESULTS: The combination of these two agents resulted in prevascularized human dental pulp organoids (Vorganoids) that more closely resembled dental pulp tissue in terms of morphology and function. Single-cell RNA sequencing of dental pulp tissue and RNA sequencing of Vorganoids were integrated to analyse key regulatory pathways associated with angiogenesis. The biomarkers forkhead box protein O1 and fibroblast growth factor 2 were identified to be involved in the regulation of Vorganoids. CONCLUSION: In this innovative study, we effectively established an in vitro model of Vorganoids and used it to elucidate new mechanisms of angiogenesis during regeneration, facilitating the development of clinical treatment strategies.